• Welcome to PHPVIBE Forums. Please log in.
T

[ Video Sharing CMS v4 ] Uploading & Processing Glitch

Started by TheBritain,

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Go Down Pages 1 2 All

TheBritainTopic starter

#25
To further clarify, I edited ff.php and replaced the $output line, trying each of the three detailed on that tutorial page.
  •  

TheBritainTopic starter

#26
I tossed the command string:
$output ="{ffmpeg-cmd} -i {input} -vcodec libx264 -s {ffmpeg-vsize} -threads 4 {output}.mp4 2>&1";

At my hosting provider, they are going to have a look at it and see what may be the issue. This is the string I am having the best luck with, as it outputs an MP4, albeit one with 0bytes.

The tester completes with all green checks.

PHP Version: 5.4.26
FFMPEG Version: 0.6.5

The command is definitely ffmpeg. The full path is: /usr/bin/ffmpeg
  •  

TheBritainTopic starter

#27
The following is the output using that command, when I try to convert the test.avi. Also, yes, I did make sure that test.mp4 did not exist before starting.

Code Select 
File to convert: test.avi
Converted file: test.mp4
Command send to server: ffmpeg -i test.avi -vcodec libx264 -s 640x360 -threads 4 test.mp4 2>&1
FFmpeg output


Code Select 
array(16) {
  [0]=>
  string(67) "FFmpeg version 0.6.5, Copyright (c) 2000-2010 the FFmpeg developers"
  [1]=>
  string(73) "  built on Jan 29 2012 17:52:15 with gcc 4.4.5 20110214 (Red Hat 4.4.5-6)"
  [2]=>
  string(747) "  configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --incdir=/usr/include --disable-avisynth --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -fPIC' --enable-avfilter --enable-avfilter-lavf --enable-libdc1394 --enable-libdirac --enable-libfaac --enable-libfaad --enable-libfaadbin --enable-libgsm --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared --enable-swscale --enable-vdpau --enable-version3 --enable-x11grab"
  [3]=>
  string(35) "  libavutil     50.15. 1 / 50.15. 1"
  [4]=>
  string(35) "  libavcodec    52.72. 2 / 52.72. 2"
  [5]=>
  string(35) "  libavformat   52.64. 2 / 52.64. 2"
  [6]=>
  string(35) "  libavdevice   52. 2. 0 / 52. 2. 0"
  [7]=>
  string(35) "  libavfilter    1.19. 0 /  1.19. 0"
  [8]=>
  string(35) "  libswscale     0.11. 0 /  0.11. 0"
  [9]=>
  string(35) "  libpostproc   51. 2. 0 / 51. 2. 0"
  [10]=>
  string(45) "[avi @ 0x1784670]max_analyze_duration reached"
  [11]=>
  string(31) "Input #0, avi, from 'test.avi':"
  [12]=>
  string(59) "  Duration: 00:00:06.06, start: 0.000000, bitrate: 891 kb/s"
  [13]=>
  string(82) "    Stream #0.0: Video: IV41 / 0x31345649, 256x240, 30 fps, 30 tbr, 30 tbn, 30 tbc"
  [14]=>
  string(63) "swScaler: Unknown format is not supported as input pixel format"
  [15]=>
  string(29) "Cannot get resampling context"
}
int(1)
  •  

TheBritainTopic starter

#28
PHPVibe has a typo on this page:
http://www.phprevolution.com/installing-phpvibe/

This Line:
Code Select 
$output ="{ffmpeg-cmd} -y -i {input} {output}.mp4 2<&1"";


Should be this:
Code Select 
$output ="{ffmpeg-cmd} -y -i {input} {output}.mp4 2<&1";


Upon testing this line, the 'Simplest command possible (debugging only):', this is my output:

Code Select 
File to convert: test.avi
Converted file: test.mp4
Command send to server: ffmpeg -y -i test.avi test.mp4 2<&1
FFmpeg output


Code Select 
array(16) {
  [0]=>
  string(67) "FFmpeg version 0.6.5, Copyright (c) 2000-2010 the FFmpeg developers"
  [1]=>
  string(73) "  built on Jan 29 2012 17:52:15 with gcc 4.4.5 20110214 (Red Hat 4.4.5-6)"
  [2]=>
  string(747) "  configuration: --prefix=/usr --libdir=/usr/lib64 --shlibdir=/usr/lib64 --mandir=/usr/share/man --incdir=/usr/include --disable-avisynth --extra-cflags='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -fPIC' --enable-avfilter --enable-avfilter-lavf --enable-libdc1394 --enable-libdirac --enable-libfaac --enable-libfaad --enable-libfaadbin --enable-libgsm --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared --enable-swscale --enable-vdpau --enable-version3 --enable-x11grab"
  [3]=>
  string(35) "  libavutil     50.15. 1 / 50.15. 1"
  [4]=>
  string(35) "  libavcodec    52.72. 2 / 52.72. 2"
  [5]=>
  string(35) "  libavformat   52.64. 2 / 52.64. 2"
  [6]=>
  string(35) "  libavdevice   52. 2. 0 / 52. 2. 0"
  [7]=>
  string(35) "  libavfilter    1.19. 0 /  1.19. 0"
  [8]=>
  string(35) "  libswscale     0.11. 0 /  0.11. 0"
  [9]=>
  string(35) "  libpostproc   51. 2. 0 / 51. 2. 0"
  [10]=>
  string(45) "[avi @ 0x1416670]max_analyze_duration reached"
  [11]=>
  string(31) "Input #0, avi, from 'test.avi':"
  [12]=>
  string(59) "  Duration: 00:00:06.06, start: 0.000000, bitrate: 891 kb/s"
  [13]=>
  string(82) "    Stream #0.0: Video: IV41 / 0x31345649, 256x240, 30 fps, 30 tbr, 30 tbn, 30 tbc"
  [14]=>
  string(63) "swScaler: Unknown format is not supported as input pixel format"
  [15]=>
  string(29) "Cannot get resampling context"
}
int(1)


It still generates a 0byte test.mp4 file, even with the simplest command available.

Thanks for all your help Alexander, I know all these support request can be overwhelming. Hopefully, once I get all the problems I run into nailed, I can put together a help cheat sheet, as I seem to have run into more complicated variants of already existing problems.
  •  

PHPVibe A.

#29
Then it's simple, the ffmpeg doesn't work. That debugging command works even on the most primitive ffmpeg versions.
I would suggest you get it uninstalled and install it according to the ffmpeg wiki for your operating system..
Make sure you uninstall it, a common mistake is to install 2 or more ffmpeg modules on the server (yes, it's possible they do not trow any error, just mess up the output badly).

TheBritainTopic starter

#30
My VPS is professionally installed and managed by A Small Orange. I have no ability to uninstall, or install FFMPEG. I run another video site on a different platform, and it handles uploading and converting the video fine, I've never looked at their video code (it is really terrible) but I am almost certain it uses FFMPEG in some way, as it was an install requirement.
  •  

TheBritainTopic starter

#31
Last Edit: by TheBritain
I did some testing, and the tester folder is set to CHMOD 755, now here is the funny bit, if I change it to 777, I get a 404. This might sound strange, but I can't access CHMOD 777 folders. What if FFMPEG is being denied write permission, and that is why I am ending up with a 0 byte file?

So to clarify:

If I set my tester folder to 755, I can access it.
If I set my tester folder to 777, I can not access it; 404 error.

This is the same with any folder I create within the root of the website. If I set that folder to 777, I can not longer access it.

This is the content of my root .htaccess file:

Code Select 
<IfModule mod_rewrite.c>
RewriteEngine on
RewriteBase /
RewriteRule ^embed/([^/]*)/$ /embed.php?id=$1 [L]
RewriteRule ^feed(.*)$ feed.php [L]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^(.*)/?$ index.php?rp=$1 [L]
</IfModule>
<ifModule mod_headers.c>
    Header set Access-Control-Allow-Origin: *
</ifModule>
  •  

TheBritainTopic starter

#32
Last Edit: by TheBritain
My host has upgraded FFMPEG to version .7 and replaced my PHP with suPHP, in an attempt to fix these errors. They still persist. I will keep at it:

As you can see, the error has changed.
Also, I am seeing if my host can get me updated to FFMPEG 2.3.

Code Select 
array(16) {
  [0]=>
  string(68) "ffmpeg version 0.7.13, Copyright (c) 2000-2011 the FFmpeg developers"
  [1]=>
  string(73) "  built on Aug 23 2014 00:25:59 with gcc 4.4.7 20120313 (Red Hat 4.4.7-4)"
  [2]=>
  string(330) "  configuration: --prefix=/usr --enable-gpl --enable-version3 --enable-nonfree --enable-pthreads --enable-x11grab --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libdc1394 --enable-libfaac --enable-libmp3lame --enable-libopenjpeg --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-zlib"
  [3]=>
  string(36) "  libavutil    50. 43. 0 / 50. 43. 0"
  [4]=>
  string(36) "  libavcodec   52.123. 0 / 52.123. 0"
  [5]=>
  string(36) "  libavformat  52.111. 0 / 52.111. 0"
  [6]=>
  string(36) "  libavdevice  52.  5. 0 / 52.  5. 0"
  [7]=>
  string(36) "  libavfilter   1. 80. 0 /  1. 80. 0"
  [8]=>
  string(36) "  libswscale    0. 14. 1 /  0. 14. 1"
  [9]=>
  string(36) "  libpostproc  51.  2. 0 / 51.  2. 0"
  [10]=>
  string(65) "[avi @ 0x28f50a0] max_analyze_duration 5000000 reached at 5000000"
  [11]=>
  string(31) "Input #0, avi, from 'test.avi':"
  [12]=>
  string(59) "  Duration: 00:00:06.06, start: 0.000000, bitrate: 891 kb/s"
  [13]=>
  string(82) "    Stream #0.0: Video: IV41 / 0x31345649, 256x240, 30 fps, 30 tbr, 30 tbn, 30 tbc"
  [14]=>
  string(53) "[buffer @ 0x28ee580] Invalid pixel format string '-1'"
  [15]=>
  string(22) "Error opening filters!"
}
int(1)
  •  

TheBritainTopic starter

#33
Alright, they can not upgrade past FFMPEG .7 without compiling CPANEL. So I am prodding them for answers. They are looking into the problem, and trying to figure out what is up. I will get this solved and leave it here for future inquisitors.
  •  

TheBritainTopic starter

#34
Well, this is new. This is the reply from my hosting:

QuoteI see. No, that is normal on SuPHP servers; it won't allow 777 on any file or folder, due security reasons. You need all files on 640 or 644 and folders on 755 only.

A few of my folders are set to 777.
  •  

TheBritainTopic starter

#35
I've started a thread on the FFMPEG site, and they seem to think my version is to far out to work. My hosting wants to charge to update past 0.7. Being cheap, I am trying to avoid paying for a CPANEL recompile. Here is the thread for any party interested.

http://ffmpeg.gusari.org/viewtopic.php?f=11&t=1635&p=4612#p4612

Long story short, I am trying to add the executable to my site, and redirect the command to the new FFMPEG. I am going to try and install it through the bash here soon.
  •  
Go Up Pages 1 2 All
 

Similar topics (7)

Important Announcement: PHPVibe Video Sharing CMS End of Life

Started by Marius P.


Replies: 1
Views: 39967


by Marius P.
The problem of video viewing PHPVibe 5.0

Started by Nayn


Replies: 25
Views: 70885


by Marius P.
embed video does not work on v5

Started by neospider69


Replies: 6
Views: 50990


by Marius P.
when slecting to unpublish music mp3 - next page says unpublished video ?

Started by spirog


Replies: 2
Views: 4432


by Marius P.
insite ads issue when selecting above/below video player location

Started by georgepanaitescu


Replies: 3
Views: 22701


by Marius P.
Video that I've uploaded needs to have that value in admin to upload

Started by spirog


Replies: 4
Views: 5724


by Marius P.
video,playlist,images, etc. (frontend) select all deselect all reselect all

Started by spirog


Replies: 3
Views: 5821


by Marius P.